Recent searches

No recent searches

Search options

Only available when logged in.
eupolicy.social is one of the many independent Mastodon servers you can use to participate in the fediverse.
This Mastodon server is a friendly and respectful discussion space for people working in areas related to EU policy. When you request to create an account, please tell us something about you.

Administered by:

Server stats:

201
active users

eupolicy.social: AboutProfiles directoryPrivacy policy

Mastodon: AboutGet the appKeyboard shortcutsView source codev4.4.1

#tinkercad

0 posts0 participants0 posts today
HowToPhil (Phillip R)

#Modular #Stencil System For 3.5"x5.5" #PocketNotebooks (#FieldNotes, #Moleskine, & Others)

This is an extension to my full-sized stencils for 3.5x5.5-inch #pocketJournals. This lets you add regular/wide ruled lines, dots, grids, tables, etc as you like in blank notebooks.

#Thingiverse #3Dprinter Downloads: thingiverse.com/thing:7060429

Also on #TinkerCAD: tinkercad.com/users/gEfJm2CRHZS

ThingiverseModular Stencil System For 3.5"x5.5" Pocket Notebooks (Field Notes, Moleskine, & Others) by howtophilExpanding on the full-page stencils I've made for 3.5x5.5 pocket notebooks, this is a modular set of stencils that allow you to easily have regular or wide ruled lines, dots, grids, tables, and blank spaces on each page in various configurations to suit your needs. Small, Tall, and Stout are the three sizes I've gone with for a set of simple module sizes. I hope they work well for you. They seem to be working well for me. I use them in some "cost-effective" 3.5x5.5-inch blank journals but, as that is the same size as some Field Notes and Moleskine pocket notebooks, they should work in those just as well.The "dot" templates will require a micron-style pen, a mechanical pencil, or (I found out) a "Tombow Fudenosuke WS-BH Calligraphy Brush Pen Hard" also works. If you choose to use a pencil, you have the option to erase the dots after you've gridded or drawn out whatever you like.You can use the layout stencils to mark out the basic design, then use the modules to put lines, grids, and dots into those boxes. Of course, you can skip the layout stencils and simply use the module stencils, placing them freeform as you wish. My full-page 3.5x5.5-inch stencils here: https://www.thingiverse.com/thing:7058617My full-page 3.5x5.5-inch dot-stencil here: https://www.thingiverse.com/thing:7059128Models for these and the other stencils are one TinkerCAD for you to tinker to your personal tastes: https://www.tinkercad.com/users/gEfJm2CRHZS
Fox

Browning BL22 – Test plates to check the bolt closure (misfires)
The misfires in the Browning BL-22 were caused by a locking plate that was no longer within the correct dimensions. This issue is well documented on this website. At one point, I 3D printed a few test plates, which made it easy to measure and determine the proper dimensions needed to eliminate the excess…
---
3xn.nl/projects/2025/05/30/bro
---
#Bl22 #bl22 #bolt #browning #misfire #repair #tinkercad

*
Ana Cardamine

#introduction #introductionfr

À la recherche d'un coin de net où trainer pendant les réunions trop longues, les pauses déj', les insomnies, et en essayant de se libérer des Gafam.

Ici, je n'ai pas tout compris et déjà changé 3 fois d'instance, retrouvé seulement 3 contacts de la vraie vie... Mais aussi plein de comptes de l'époque où twitter était fréquentable. Et j'aime bien le système de liste... C'est prometteur !

Et donc la présentation : J'aime lire des bd (et +), je dessine (parfois), j'aime la culture diy ... Ma dernière lubie c'est l'impression 3d (#tinkercad ).

Anxieuse, je vis actuellement en dissonance cognitive. #LeFuturCÉtaitMieuxAvant

*
MaryPot

#3dprinting #3Ddesign #tinkercad #braille #blind

-Open TinkerCad
-Start new 3D design
-Click on Basic Shapes on the right.
-Select Shape Generators from bottom of drop-down menu.
-Select All (not Featured)
-Scroll down - click on More Shapes - repeat x30

*Boggles the designer mind to have so many tweekable models to play with!

*Including a #braille font where you type in the English, and it generates the braille for it!

**Yes. It is an old feature - but it has been filled up a lot lately.

*
Benedikt Groß

Moved on from #Tinkercad to #OpenSCAD for more complex modeling for #3dprinting. With the script-only based modelling and the instant feedback 3d viewer I immediately felt home 😂.

openscad.org

I think OpenSCAD is especially strong for "parametric design" projects. In addition there are a bunch of great libraries e.g. BOSL2 for standard parts and helpers, also plenty of great scripts around on printables like this Parametric Hinge script:

printables.com/model/307580-pa

TrendingLive feeds
About