It’s #Destiny and a seed ship! Model by Martin Taichl. He’s also done Atlantis, so that’ll be one of my next prints. You can find his models here: https://www.printables.com/@Martin #Stargate #StargateUniverse #SGU #ScaleModels #MKMModelwerx

I’ve printed my first model. 1/1400 scale Narendra (Ambassador concept) class. Model created by Dylan Wassell. You can find his work here: https://www.patreon.com/c/starshipsnstuff/home

#StarTrek #StarTrekModels #SciFiModels #AmbassadorClass #NarendraClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx

Pin wash done and cleaned up on the ventral saucer. #StarTrek #StarTrekModels #SciFiModels #MirandaClass #Starfleet #FederationStarship #ShipsOfStarTrek #ScaleModels #MKMModelwerx

The 2.7mm COB light strips arrived yesterday, meaning I can now finish wiring up the Neo-Connie’s nacelles. #StarTrek #StarTrekModels #SciFiModels #NeoConstitution #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx

Phaser banks painted. There’s just a tiny amount of cleanup needing done to them. That’s the last of the painted details (unless I see something I’ve missed), all the rest will be done with decals. #StarTrek #StarTrekModels #SciFiModels #MirandaClass #Starfleet #Federation #Starship #ShipsOfStarTrek #ScaleModels #ModelBuilder #MKMModelwerx

Painted and masks removed. Next is masking the saucer section. #StarTrek #StarTrekModels #SciFiModels #MirandaClass #Starfleet #Federation #Starship #ShipsOfStarTrek #ScaleModels #ModelBuilder #MKMModelwerx

All masks have been applied to the rollbar and nacelles. Time for paint! #StarTrek #StarTrekModels #SciFiModels #MirandaClass #Starfleet #Federation #Starship #ShipsOfStarTrek #ScaleModels #ModelBuilder #MKMModelwerx

Got the ventral markings applied to the #Cerritos earlier than planned. #StarTrek #StarTrekModels #SciFiModels #Federation #Starship #ScaleModels #ShipsOfStarTrek #StarTrekLowerDecks #MKMModelwerx

Over the last couple of days, I have finished cleanup and applied a clear gloss coat on the #Cerritos model. Today I started applying the Aztec decals. #StarTrek #StarTrekModels #SciFiModels #Federation #Starship #ScaleModels #ShipsOfStarTrek #StarTrekLowerDecks #MKMModelwerx

Detail painting done, all windows scraped out, “off” windows painted black (as there was some light leaks), just need to do final cleanup before applying a gloss coat in preparation for the Aztec decals arriving (hopefully next week). #StarTrek #StarTrekModels #SciFiModels #Federation #Starship #Cerritos #ScaleModels #ShipsOfStarTrek #StarTrekLowerDecks #MKMModelwerx

#Duderstadt and #Cerritos have both been primered and mostly light blocked. There’s a few areas on both I need to go back over, but I’ll leave the Duderstadt for a few weeks just to make sure the primer is properly dry while I focus on the Cerritos. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #CaliforniaClass Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx

Enterprise ready for launch. Powered up. 2/2 #StarTrek #StarTrekModels #GalaxyClass #USSEnterprise #Enterprise #Starfleet #Federation #Starship #MKMModelwerx

Gap/seam filling needed around the #Duderstadt’s saucer edge. While I wait for it to set, I’ll wire up most of the LEDs on the Venator. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx

Control tower LEDs have been wired up. Quick light test before I glue the tower to the main body. #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx

Last night I applied milliput around the gaps/seams of the two control towers. Time to get them sanded. #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx

Glue applied to the saucer parts with masking tape holding them together. #StarTrek #StarTrekModels #SciFiModels #Federation #Starship #Cerritos #ScaleModels #ShipsOfStarTrek #StarTrekLowerDecks #MKMModelwerx

The 1/1400 USS #Cerritos kit is finally here! Just waiting on the Aztec decals to arrive. #StarTrek #StarTrekModels #SciFiModels #Starfleet #Federation #Starship #LowerDecks #ScaleModels #MKMModelwerx

1/350 USS Grissom commission complete. 2/2 Powered up. #StarTrek #StarTrekModels #SciFiModels #OberthClass #Grissom #Starfleet #Federation #Starship #350Scale #ScaleModels #ShipsOfStarTrek #MKMModelwerx

1/350 USS Grissom commission complete. 1/2 Powered down. #StarTrek #StarTrekModels #SciFiModels #OberthClass #Grissom #Starfleet #Federation #Starship #350Scale #ScaleModels #ShipsOfStarTrek #MKMModelwerx

Panel lines and other details done on the lower sled section and secondary hull. Will leave overnight and then see if I need to touch up any areas. #StarTrek #StarTrekModels #SciFiModels #OberthClass #Grissom #Starfleet #Federation #Starship #350Scale #ScaleModels #ShipsOfStarTrek #MKMModelwerx